How to safely run the pipe beveling machine
First, the pipe groove machine on the cutting tool or die strength and accuracy must meet the cutting requirements of the cutting material requirements, if not meet, be sure to respond in time with the leadership, and cutting tools to sharp, hand test whether the next cutting tool is tight, tight Solid reliability is the safest guarantee ah, in the drive area, you have to see if there is no protective cover, to avoid the splash of material to break out to hurt themselves, in the operation of the time, to prohibit demolition Oh
Second, before the operation to open the pipeline beveling machine, let it idle for a while, to see if there is no exception, in the absence of circumstances to continue to work Oh. The
Third, the knife row and the tool should be solid and reliable, if not too much trouble on the big, if the process of running out of the flight, the consequences could be disastrous, so be sure to check the good situation. The
Fourth, the time of operation, please do not put the body too close to the material cut, because even if you bring protective equipment, there may be accidents. Strictly prohibit the operator directly to hand to wipe the groove on the iron filings, you look at it unhappy also endured, you hand to wipe simply become a baptism of blood.
Fifth, in addition to the operator, in the use of pipe groove machine, prohibit other people close, even if it is not a second stay, splash out of things is easy to hurt people. The
The last step, remember to work after the power pull, and do a certain amount of routine maintenance work.
How to maintain all kinds of cutting groove machine
First, if the equipment has a hydraulic system, it should carefully clean up the filter device, check the oil circuit is leaking phenomenon, and some words one by one maintenance excluded.
Second, to very very carefully check the transmission system, inside the drive belt and chain device how to say is also considered the second life of the pipeline groove machine ah
Third, check the whole machine switch system board, if found to have short-circuit or welding mouth loose phenomenon, to contact the maintenance staff in time and the problem of pipe and groove machine with a good separation, to prevent the operator Misuse
Fourth, check the equipment of the bolts are all fastened, there is no tightening can directly take their own screwdriver firmly. Pipeline beveling machine The main components of CNC cutting machine is divided into three blocks: mechanical structure, system electrical parts and transmission parts. In general, the details of the NC flame cutting machine and CNC plasma cutting machine components are basically the same, but the plasma cutting this one, the main application of the arc pressure automatic height adjustment device, the device technology content is relatively high, but also easy Faulty parts.
Jiu'an Machinery will continue to share the use of pipe groove machine maintenance and repair skills, whether you use the company's products, are sure to help you. Concerned about Langfang Jiu'an machinery, here are the most authoritative technical support, the most comprehensive product information, the most popular news.
